VCC-5CXP3NIR
Rev. 905-0123-00
©2018 CIS Corporation. All rights reserved.
25
9.5 Index Mode
This is a mode to directly specify the Index number to apply by IndexSelectorModeIndexNumber.
Every time when a trigger is input, the Index parameter set specified by IndexSelectorModeIndexNumber is applied to
the camera.
Operational flow chart
・
As to TriggerSelectorAndActivation, please select one from the below, according to the mode to be used.
FrameStartRisingEdge/ FrameStartFallingEdge/ FrameStartLevelHigh/ FrameStartLevelLow
(1)
Edge control
Exposure time for each frame shall be controlled by the preset parameter set.
(2)
Pulse width control
Exposure time for each frame is the pulse width of the trigger. Exposure time of the parameter set is not
referred.
※
Notes for the issuing timing of IndexSelectorModeIndexNumber command
To reflect the specified parameter set surely to the next frame, please issue IndexSelectorModeIndexNumber,
wait for the response of ACK, and then input a trigger pulse.
Applying param
Index
#0
Applying param
Index
#1
Applying param
Index
#
2
Applying param
Index
#3
Applying param
Index
#
１
5
#0
#1
#0
#1
#15
Index Selector
RegisterModeIndexNumber
Shutter
Gain
Param
#0
Shutter
Gain
Param
#1
Shutter
Gain
Param
#
2
Shutter
Gain
Param
#3
Shutter
Gain
Param
#
１
5
Sequence Index
Parameter Index Number
Combination of each Index
and parameter set
