VCC-5CXP3NIR
Rev. 905-0123-00
©2018 CIS Corporation. All rights reserved.
19
8.10
Camera Timing Output
The following signals can be output via 6pins circular connector on the camera rear according to the settings of
LineSource.
Digital IO Control
LineSelector
Line1
LineMode
Output
LineSource
OFF
ExposureActive
FrameActive
LineActive
TriggerPacketActive
・
LineSource
ExposureActive
：
This is to indicate the exposure period of the image sensor with Hi Active.
FrameActive
：
This is to indicate the frame effective period with Hi Active.
LineActive
：
This is to indicate the line effective period with Hi Active.
TriggerPacketActive
：
This is to decode and output the uplink trigger packet signals from the frame grabber
board.
8.11
DeviceUserID Setting
DeviceControl
DeviceUserID
[User Definition]
A user-defined device name can be set in the camera with the maximum of sixteen characters letter string. Execute
“UserSetSave” to save the user-defined device name in EEPROM in the camera.
Execute “UserDefault” to restore to the factory settings.
※
Register area is 16 byte in total. Please input single-byte alphanumeric characters.
