Cirris Signature 1000M, User Manual

Page: 13 / 66

Section 1: Work With the Hardware / The Frame Mount Stand
1000M User’s Guide / page 13
The Frame Mount
Stand
There may be times when you will want to test custom fixtures with mating adapters
that are not offered by Cirris. These fixtures then connect into standard Cirris connec-
tor adapters plugged into the 1000M. To secure your custom fixtures, use a frame
mount stand from Cirris. This photo shows a frame mount stand for use at scanner
positions J1-J2 (part number ACIR-12).
To install the frame mount stand, do these things:
1. Remove the cover plate, and plug the appropriate connector adapter into the
1000M as usual. In our example, we’ll install a double-high adapter into position
J1-J2.
2. Install the frame mount stand onto the 1000M in place of the cover plate you
would normally use to secure the adapter. Be sure to lock the twistlock fasteners
securely.