Cirris Signature 1000M, User Manual, Page: 22 / 66

Section 4: Learn a Sample Cable, Store it in Memory / Store the Sample Cable in memory
1000M User’s Guide / page 22
transcribing the information to a blank documentation form (see
page 57) as you go. Compare the transcribed information to the Sample
Cable’s specification sheet or build list to be sure it’s a good cable.
3. Disconnect the Sample Cable from the analyzer.
Store the Sample
Cable in memory
Now that you’ve learned the Sample Cable, and verified that the wirelist data is
correct, you may store the cable in the analyzer’s memory. To store the cable, do these
things:
1. Press and hold in the
Memory
button (located on the back of the analyzer as
shown in this photo).
2. When you press the
Memory
button, the analyzer will prompt
Ready To Save
Learned Cable . Continue to hold the
Memory
button in for instructions 3 and
4.
3. While continuing to hold in the
Memory
button, press
Advance Display
to
select a memory location. The analyzer will default to the first unused memory
location. Each time you press
Advance Display
, the analyzer prompts the next
unused memory location. For example, if location #1 is empty, the display will
prompt
Memory Location 1 Is Now Unused . Keep pressing
Advance Dis-
play
until you find the memory location you want.
Note
: If the display prompts
No Unused Memory Available , all of the analyzer’s memory locations are
full. You’ll have to delete a wirelist to make room available. See page 29 for
instructions on how to do this.
Press and hold
READY TO SAVE
LEARNED CABLE
Hold in the MEMORY button while you step by pressing here