Section 3: What the Option Settings Mean / Count All Cables
1000M User’s Guide / page 20
Count All Cables
Once the analyzer is programmed, it begins to count the cables it has tested. When
this option is
ON
, the printout of test results shows the total number of cables that
have been tested since it was programmed, and the number of cables that have tested
as good. If this option is
OFF
, the printout will show only the number of cables
which tested as good.
Auto Print
When you have a printer connected to your 1000M, and this option is set to
ON
, a
one-line result will be printed out after each cable is tested. It will indicate if the
cable tested as good or bad. If this option is
OFF
, the analyzer will only display the
test result (good or bad) on its LCD display. It will not print a one-line report on each
test.
Summary of Contents for Signature 1000M
