Circutor VLOG-10, Instruction Manual

Page: 8 / 30

8
VLOG-10
Instruction Manual
3.2.- INSTALLATION
While the device is connected, the terminals, opening the cover or removing el-
ements may expose hazardous live parts. The device must not be used until the
installation process is complete.
The device features a sliding door that
PREVENTS
the two connectors from
being connected at the same time, due to the risk of electrocution:Mains
and USB�
Never tamper with the mechanical sliding door to enable both connections
at the same time�
There is a risk of electrocution and/or destruction of the connected devices
( VLOG-10 and PC)
Check the following points before connecting the device:
• Power supply and voltage measurement :

Single-phase voltage: 85 to 265 V~

Frequency: 50 to 60 Hz

Device consumption: 0�8 to 1�2 VA
• Operating conditions :

Operating temperature:
-10 to 55ºC

Operating humidity: 25 to 75 % RH
•
Safety
: CAT III 300V
3.3.- TERMINALS OF THE DEVICE
Table 3:List of the VLOG-10's terminals�
Terminals on the lower side of the eBOX 150 device
1: L , Power supply / mains input 3: USB , USB connector
2: N , Power supply / mains input
1 2 3
Puerta corredera
Sliding door
Figure 1:VLOG-10 terminals�