Circutor VLOG-10, Instruction Manual

Page: 7 / 30

7 Instruction Manual
VLOG-10
3�- INSTALLING THE DEVICE
3.1.- PRELIMINARY RECOMMENDATIONS
In order to use the device safely, it is critical that individuals who handle it follow
the safety measures set out in the standards of the country where it is being used,
use the personal protective equipment necessary (rubber gloves, face protection
and approved flame-resistant clothing) to prevent injuries due to electric shock or
electric arc due to exposure to current-carrying conductors and pay attention to
the various warnings indicated in this instruction manual.
The VLOG-10 must be installed by authorised and qualified staff.
The power supply must be disconnected before handling, altering the connections or replacing
the device. Handling the device while it is connected is hazardous to people nearby.
It is essential to keep the cables in a perfect condition to avoid accidents, personal injury and
damage to installations.
Limit the operation of the device to measuring the specified current or voltage values.
The manufacturer of the device shall not be held responsible for any damage resulting from the
user or installation company failing to observe the warnings and/or recommendations indicated
in this manual nor for any damage resulting from the use of non-original products or accesso-
ries or those from other brands.
Inspect the device before using it. Make sure that there are no cracks and that the housing is
intact.
Do not use the device to take measurements if you detect an anomaly or malfunction.
Check the environment in which the device is installed before taking a measurement. Do not
use the device to take measurements in dangerous, explosive, wet or damp environments.
The device must be disconnected from any power supply before carrying out any
maintenance or repairs, or handling any of the device's connections.
Contact the after-sales service if you detect that the device is not working prop-
erly.