Circutor VLOG-10, Instruction Manual

Page: 19 / 30

19 Instruction Manual
VLOG-10
5.2.- DISPLAY
On the software's main screen,
Figure 10
, we can view the device's various settings.
5�2�1�- FACTORY SETTINGS
Figure 11:Factory settings�
These settings cannot be changed by the user:

Número de serie (Serial number) : The device's serial number.

Versión hardware (Hardware version) : Identifies the device's hardware version.

Versión firmware
(Firmware version)
: The firmware version installed on the device.

Identificador (Identifier) : the version of the device.

Tensión pila (Battery voltage) : Indicates the voltage of the battery inside the device.
5�2�2�- PARTIAL ENERGY METERS
Figure 12:Partial energy meters�
These parameters indicate the number of mains incidents detected since the last reset.

Logs: The number of valid logs stored by the device.

Eventos (Events) : The number of events detected and stored by the device.

Sobretensión (Overvoltage) : The number of power surges above the configured
threshold value.

Hueco de tensión
(Voltage gap)
:
The number of voltage drops below the configured
threshold value and above 85 V
~
.

Corte de tensión (Voltage interrupt) (< 85 VAC ): Voltage drops below 85 V ~ .

Desviación en frecuencia
(Frequency deviation)
:
The number of frequency devia-
tions above or below the configured threshold.