Circutor MYeBOX 150, Instruction Manual

Page: 43 / 94

43
Instruction Manual
MYeBOX 150 - MYeBOX 1500
The device only recognises cards in FAT32 format. If a MicroSD memory card in
another format is used, the device will not be able to write to it and a write error
will be indicated by the
REC
LED blinking.
We recommend not using cards that have information you wish to keep, and
backing up the information frequently for security purposes.
A ZIP file containing three file types is saved to the MicroSD memory:

A *�EVA file containing all the device's events since the last time the database was
deleted.

A *�EVQ file containing all the quality parameters of the most recent log.

Six *�STD files containing all the measurement parameters of the most recent log.
The files can be downloaded using the μUSB connector or can be sent to MYeBOX Cloud in
the cloud.
4.8.2.1. .EVA file
All events performed by the device are recorded in the �EVA file, with the date and time when
they occurred.
The MYeBOX can detect and record the following incidents:
Table 18: .EVA file description.
EVENT DESCRIPTION
BAT_ON Battery powered device.
BAT_OFF Battery level that causes the device to switch off
CLEAR_ENERGY Energy loss (boot)
SETUP_LOST Setup loss (defect)
SETUP_CHANGED Change of a configuration parameter
SETUP_TRANS_RATIO_CHANGED
Change of transformation ratio configurations.
SETUP_TIME_CHANGED
Change of date and time configuration.
SETUP_ALARM_CHANGED
Change of an alarm parameter configuration.
SETUP_GAIN Loss of measurement adjustment parameters (defect)
FORMAT_SD Formatting of MicroSD memory
DELETE_STD_FILE Deleting STD files due to erasing a measurement
DELETE_EVQ_FILE Deleting EVQ files due to erasing a measurement
POWER_ON Device switched on
POWER_OFF Device switched off
INPUT_1_ON Status of input 1 is ON
INPUT_2_ON Status of input 2 is ON
INPUT_1_OFF Status of input 1 is OFF
INPUT_2_OFF Status of input 2 is OFF
OUTPUT_1_ON
Status of output 1 is ON
OUTPUT_2_ON
Status of output 2 is ON
OUTPUT_1_OFF Status of output 1 is OFF
OUTPUT_2_OFF Status of output 2 is OFF
DATA_CHANGED_BEFORE Date change (prior)
DATA_CHANGED_AFTER Date change (new)
SD_SATATUS_OK MicroSD status is correct