Circutor MYeBOX 150, Instruction Manual

Page: 42 / 94

42
MYeBOX 150 - MYeBOX 1500
Instruction Manual
4.8.- DATA LOGGING
4�8�1� DATABASE
The
MYeBOX
has a database that logs all the device's parameters and events.
To begin logging data, push the button
.
When the button is pushed, the screen shown in
Figure 36
appears to confirm the beginning of recording.
YES
RECORDING
Figure 36: Recording confirmation screen.
Use the and keys to select whether or not the device should record. And press the
key to confirm the option.
Press the button again to end logging.
The REC LED will be lit while data is being logged. (
“4.5.- LED INDICATORS”
)
The name of the log where all the measurements will be saved is configured in the Device
profile setup
menu (
“6.2.2.- MEASUREMENT NAME”
).
The device adds the configured name to the recording date so that the same name can be used
for more than one log.
Note: The energy parameters saved in the database log are reset every time a new data log
is started.
Note: If the device resets the accumulated energy parameters while logging data, they will not
be lost.
Note:
Setup menu changes must be made while data logging is off.
Note: The data recording process cannot be started or ended from the setup menu; the
button is disabled.
All logs can be accessed through the MYeBOX mobile application.
4�8�2� MicroSD MEMORY
The device comes with MicroSD memory factory-installed for data logging.
Table 17: Features of the MicroSD memory�
MicroSD Memory
Format FAT32
Capacity 16 Gb