Circutor line-LM20I-TCP kit, Instruction Manual

Page: 29 / 112

29
Instruction Manual
line-M
4�5�- MODBUS MEMORY MAP line-M-4IO-R
Note: For all modbus map parameters, SLOT1 corresponds to the first expansion module connected to
the right-hand side of the line-CVM-D and SLOT2 corresponds to the second connected module.
4�5�1�- INPUT AND OUTPUT STATUS
The Function 0x02 , is implemented for these variables.
Table 13: Modbus Memory Map: Output and input status�
Parameter Format
Address
Value
SLOT 1 SLOT 2
Digital input 1 bool C5A8 C990 0: Deactivated - 1: activated
Digital input 2 bool C5AC C994 0: Deactivated - 1: activated
Digital input 3 bool C5B0 C998
0:
Deactivated -
1:
activated
Digital input 4 bool C5B4 C99C 0: Deactivated - 1: activated
Relay output 1 bool C679 CA61 0: Deactivated - 1: activated
Relay output 2 bool C68D CA75
0:
Deactivated -
1:
activated
Relay output 3 bool C6A1 CA89 0: Deactivated - 1: activated
Relay output 4 bool C6B5 CA9D 0: Deactivated - 1: activated
4�5�2�- PULSE METERS
The
Function 0x04
: register readout, is implemented for these variables.
Table 14: Modbus Memory Map: Pulse meter�
Parameter Format
Address
SLOT 1 SLOT 2
Pulse counter of digital input 1 Uint [64]
C5A8 - C5A9 -
C5AA - C5AB
C990 - C991 -
C992 - C993
Pulse counter of digital input 2 Uint [64]
C5AC - C5AD -
C5AE - C5AF
C994 - C995 -
C996 - C997
Pulse counter of digital input 3 Uint [64]
C5B0 - C5B1 -
C5B2 - C5B3
C998 - C999 -
C99A - C99B
Pulse counter of digital input 4 Uint [64]
C5B4-C5B5-
C5B6-C5B7
C99C-C99D-
C99E-C99F
Parameter deletion is carried out by
Function 05
: writing a relay.
Table 15: Modbus Memory Map: Pulse meter deletion�
Deleting parameters Format
Address
Value to be sent
SLOT 1 SLOT 2
Deleting the pulse counter from digital input 1 Bool C710 CAF8 0xFF00
Deleting the pulse counter from digital input 2 Bool C711 CAF9 0xFF00
Deleting the pulse counter from digital input 3 Bool C712 CAFA 0xFF00
Deleting the pulse counter from digital input 4 Bool C713 CAFB 0xFF00