Circutor line-LM20I-TCP kit, Instruction Manual

Page: 8 / 112

8
line-M
Instruction Manual
1 - VERIFICATION UPON RECEPTION
Upon reception of the device check the following points:
a) The device meets the specifications described in your order.
b) The device has not suffered any damage during transport.
c) Perform an external visual inspection of the device prior to switching it on.
d) Check that it has been delivered with the following:
- An installation guide
- An expansion connector.
- 4 clamping clips.
If any problem is noticed upon reception, immediately contact the transport com-
pany and/or
CIRCUTOR
's after-sales service
2 - PRODUCT DESCRIPTION
The line-CVM and line-EDS devices have expansion modules to increase their performance.
The expansion modules available are:

line-M-4IO-R , expansion module with 4 digital inputs and 4 relay outputs.

line-M-4IO-T expansion module, with 4 digital inputs and 4 transistor outputs.

line-M-4IO-A
, expansion module with 4 analogue inputs and outputs.

line-M-4IO-RV , expansion module with 4 digital inputs (230 V~) and 4 relay outputs.

Line-M-EXT-PS
, power adapter module.

line-M-3G , expansion module that adds 3G connectivity to line-EDS devices.

line-M-20I , hub with 20 digital inputs.

line-TCPRS1
,
RS-485/RS-232 to TCP/IP converter.

line-LM20I-TCP kit , hub with 20 digital inputs that includes an RS-485/RS-232 to TCP/IP con-
verter.

line-LM40I-TCP kit , hub with 40 digital inputs that includes an RS-485/RS-232 to TCP/IP con-
verter.
Each
line-CVM
or
line-EDS
device enables up to 2 expansion modules to be directly connected to their
right-hand side.
(1)
line-EDS line-M line-M
line-M line-M line-CVM
Figure 1: Line-EDS and line CVM expansion module connection�
(1)
Expansion module types:
line-M-4IO-R
,
line-M-4IO-T, line-M-4IO-RV, line-M-4IO-A and line-TCPRS1�