61
Instruction Manual
line-M
Note:
SLOT1 is the expansion module nearest
line-CVM
, SLOT2 is the following expansion module.
To exit the configuration menu, hold down (>2s) key
.
7�4�1�- CONFIGURATION OF DIGITAL INPUTS 1 ��� 4
Note:
Digital input x configuration is identified by the literal
D INx
at the bottom centre of the display.
See Digital Input Configuration in section
"4.4.1.- CONFIGURATION OF DIGITAL INPUTS 1 ... 4."
7�4�2�- CONFIGURATION OF RELAY OUTPUTS 1 ��� 4
Note:
Relay output x configuration is identified by the literal
D OUTx
at the bottom centre of the display.
See Relay Output Configuration in section
"4.4.2.- CONFIGURATION OF RELAY OUTPUTS 1 ... 4."
7�5�- MODBUS MEMORY MAP Line-M-410-RV
Note:
For all modbus map parameters,
SLOT1 corresponds to the first expansion module connected to
the right-hand side of the
line-CVM-D
and SLOT2 corresponds to the second connected module.
7�5�1�- INPUT AND OUTPUT STATUS
See input and output status addresses in section
"4.5.1.- INPUT AND OUTPUT STATUS"
7�5�2�- ALARMS
See alarm activation date addresses in section
7�5�3�- DEVICE CONFIGURATION VARIABLES
7�5�3�1�- Digital Input Configuration
See Digital Input Configuration Addresses in section
"4.5.4.1.- Digital Input Configuration”
7�5�3�2�- Relay Output Configuration
See Relay Output Configuration Addresses in section
Summary of Contents for line-LM20I-TCP kit
