Circutor Line-CVM-D32, Instruction Manual

Page: 65 / 106

65
Instruction Manual
line-CVM-D32
Press key to skip through the digits.
Note: Maximum and minimum programming value depends on the selected variable.
Hold down key to validate the value.
Use key to skip to the next programming point.
6�6�3�- CONNECTION AND DISCONNECTION DELAY
Note:
Screen visible if the selected digital output variable is in
Table 10
, Table 11,
Table 12
or
Table 13.
This screen enables alarm connection and disconnection delay configuration in seconds.
DELAY ON
0
S
0
S
DELAY OFF
OUT1 SETUP
Hold down key to set connection delay
(DELAY ON)
to validate the value.
Hold down key to set disconnection delay
(DELAY OFF)
to validate the value.
Use keys and to modify the digit's value.
Press key to skip through the digits.

Connection and Disconnection Delay�
Minimum value: 0 s.
Maximum value:
65499 s.
Hold down key to validate the value.
Use key to skip to the next programming point.
6�6�4�- HYSTERESIS AND STATUS OF CONTACTS
Note: Screen visible if the selected digital output variable is in
Table 10
, Table 11,
Table 12
or
Table 13.
This screen enables hysteresis value and contact status configuration.
HYSTERESIS
0
%
NO
CONTACT TYPE
OUT1
SETUP
Hold down key to set hysteresis value
(HYSTERESIS)
, the difference between the alarm on and off