Circutor Line-CVM-D32 Instruction Manual Download Page 3

Page: 3 / 106

Instruction Manual

line-CVM-D32

SAFETY PRECAUTIONS

DANGER

Warns of a risk, which could result in personal injury or material damage.

ATTENTION

Indicates that special attention should be paid to a specific point.

Follow the warnings described in this manual with the symbols shown below.

If you must handle the unit for its installation, start-up or maintenance, the following should be

taken into consideration:

Incorrect handling or installation of the device may result in injury to personnel as well as damage to

the device. In particular, handling with voltages applied may result in electric shock, which may cause

death or serious injury to personnel. Defective installation or maintenance may also lead to the risk of

fire.

Read the manual carefully prior to connecting the device. Follow all installation and maintenance in-

structions throughout the device’s working life. Pay special attention to the installation standards of

the National Electrical Code.

Refer to the instruction manual before using the device

In this manual, if the instructions marked with this symbol are not respected or carried out correctly, it can result

in injury or damage to the device and /or installations.

CIRCUTOR S�A�U�

reserves the right to modify features or the product manual without prior notification.

DISCLAIMER

CIRCUTOR S�A�U�

reserves the right to make modifications to the device or the unit specifications set

out in this instruction manual without prior notice.

CIRCUTOR S�A�U�

on its web site, supplies its customers with the latest versions of the device specifi-

cations and the most updated manuals.

www.circutor.com

CIRCUTOR S�A�U�

recommends using the original cables and accessories that are sup-

plied with the device.

Summary of Contents for Line-CVM-D32











































































































Search results

Summary of Contents for Line-CVM-D32

Reviews:

Related manuals for Line-CVM-D32

Brands by name

Popular brands

Circutor Line-CVM-D32, Instruction Manual

Search results

Summary of Contents for Line-CVM-D32

Reviews:

Related manuals for Line-CVM-D32

Brands by name

Popular brands