68
line-CVM-D32
Instruction Manual
HIGH PERIOD
0
0
LOW PERIOD
ms
x10
OUT1
ms
x10
SETUP
Hold down key
to set
pulse width
to a high level
(HIGH PERIOD)
.
Hold down key
to set
pulse width
to a low level
(LOW PERIOD)
.
Use keys
and
to modify the digit's value.
Press key
to skip through the digits.
Pulse width:
Minimum value:
0 x10 ms.
Maximum value:
999 x10 ms.
Hold down key
to validate the value.
Use key
to skip to the next programming point.
6�6�8�- DIGITAL OUTPUT MANUAL OPERATION
Note:
Screen displayed if the selected digital output variable is
MANUAL
, see
This screen enables manual digital output activation.
RATIOS
SETUP
OUT1
STATUS
OFF
NO
CONTACT TYPE
Hold down key
to set
output status
(STATUS)�
Use keys
and
to skip through the different options:
OFF,
Disconnected output.
ON,
Connected output.
Hold down key
to set
contact status
(CONTACT TYPE)
.
Use keys
and
to skip through the different options:
NC,
Contact
normally closed.
NO,
Contact normally open.
Hold down key
to validate the value.
Use key
to skip to the next programming point.
