Circutor CEM-C31-485-DS, Instruction Manual

Page: 17 / 58

5�- DISPLAY
The CEM-C31 has 2 display modes:

Display in standby mode

Display in reading mode
5.1.- DISPLAY IN STANDBY MODE
With the display in standby mode, all of the information is presented in cyclic form without any
need to perform any action on the CEM-C31 buttons.
This mode displays different parameters, see
Table 9 and Table 10
, that alternate every 6
seconds.
The device is in this mode by default when none of the buttons are pressed.
Short press the button to stop the cyclic movement of the parameter being shown at the
time.
From then on, short press the
button to browse all the parameters defined in
Table 9
and
Table 10
.
Table 9: Standby mode displays (Table 1)
Models CEM-C31-T1, CEM-C31-485-T1, CEM-C31-485-DS
(Impulse count option
(1)
)
Screen Parameters
Total imported active energy
Total exported active energy
Only displayed in the 4-quadrant version.
Reactive energy quadrant L+ total
(2)
Reactive energy quadrant L- total (2)
Only displayed in the 4-quadrant version.
Reactive energy quadrant C- total (2)
Only displayed in the 4-quadrant version.
17
Instruction Manual
CEM-C31