Circutor CEM-C31-485-DS, Instruction Manual

Page: 34 / 58

programming screen.
Short press the button to access the next programming step.
6�2�4� PERIPHERAL ADDRESS
Note:
This is only displayed if it is a
CEM-C31-485-T1
or
CEM-C31-485-DS
or if there is a
CEM
M-RS485
(communications interface for the CEM family of devices) connected to the CEM-
C31-T1 model.
This is the home screen for entering the peripheral address.
Long press the button to view the value to be programmed.
To write or modify the value, short press the button
repeatedly, increasing the value of the flashing digit.
When the desired value is shown on the screen, move onto the next digit with a long press on
the button, allowing the remaining values to be modified.
To validate the data, move to the last digit and long press the button; the validation screen
will appear (
Figure 18
) indicating that the programming value has been saved.
After a few seconds viewing the screen shown on
Figure 18
, the system returns to the
Peripheral address programming main screen.
Minimum value : 1.
Maximum value : 254
Short press the button to access the next programming step.
34
CEM-C31
Instruction Manual