Circutor CEM-C31-485-DS, Instruction Manual

Page: 35 / 58

6�2�5� TRANSMISSION SPEED ( BAUD RATE)
Note: This is only displayed if it is a CEM-C31-485-T1 or CEM-C31-485-DS or if there is a
CEM
M-RS485
(communications interface for the
CEM
family of devices) connected to the
CEM-
C31-T1 model.
This is the home screen for entering the transmission speed.
Long press the button to view the value to be programmed.
The transmission speed (Baud rate) is selected on this screen,
and may be: 9600 , 19200 or 38400�
Short press the button to browse the different options.
To validate the data, long press the button and the validation screen will appear
(
Figure 18
) indicating that the programming value has been saved.
After a few seconds viewing the screen shown on
Figure 18
, the system returns to the
Transmission speed programming main screen.
Short press the button to access the next programming step.
6�2�6� TYPE OF COMMUNICATIONS
Note: This is only displayed if it is a CEM-C31-485-T1 or CEM-C31-485-DS or if there is a
CEM
M-RS485
(communications interface for the
CEM
family of devices) connected to the
CEM-
C31-T1 model.
This is the home screen for selecting the number of bits, the
parity and the number of stop bits of the communications frame.
Long press the button to view the value to be programmed.
35
Instruction Manual
CEM-C31