CIRCULAR SOLUTIONS CS-BRT20, User Manual

Page: 28 / 36

LOGIX MAPPING
Document No. CS-BRTD101 Page 28 of 36
Revision 2
HardwareMACaddress SINT[6]
Ethernet MAC address
Analog Input - Voltage (0-10V) REAL Analog Input in Volts (when DIP SW3.2 =0)
Analog Input - Current (0-20mA) REAL Analog Input in mA (when DIP SW3.2 =1)
CurrentDO0 REAL
Current consumption of Sensor Healthy LED
(mA)
CurrentDO1 REAL Current consumption of Trip/Fault LED (mA)
CurrentDO2 REAL
Current consumption of DO2 (Emitter Gate)
(mA)
CurrentDO0On REAL
Last On Current consumption of Sensor Healthy
LED (mA)
CurrentDO1On REAL
Last On Current consumption of Trip/Fault LED
(mA)
CurrentDO2On REAL
Last On Current consumption of DO2 (Emitter
Gate) (mA)
Beam Unhealthy Counter DINT Beam Unhealthy Fault Counter
Trip Counter DINT Trip Counter
Fault Counter DINT Fault Current Fault Counter
Reset Counter DINT Reset Button Counter
Beam Self-Test Counter DINT Beam Self-Test Counter
ResetStatsCommand Readback DINT Echo of Output Assembly
Table 4.1 – Pre-start Warning Logix 5000 input assembly parameters
4.1.1. O
UTPUT
A
SSEMBLY
The following parameters are used in the Output assembly of the Pre-start Warning
module.
Output
ResetStatsCommand SINT Transition from 0-1 triggers reset stats
Table 4.2 – Pre-start Warning Logix 5000 Output Assembly Parameters