EES3 Hardware Interface Description
6.2 Mounting EES3 onto the Application Platform
111
EES3_HD_v01.100b
Page 105 of 118
2009-08-12
Confidential / Released
6.2.3.2
Maximum Temperature and Duration
The following limits are recommended for the SMT board-level soldering process to attach the
module:
•
A maximum module temperature of 245°C. This specifies the temperature as measured at
the module’s top side.
•
A maximum duration of 30 seconds at this temperature.
Please note that while the solder paste manufacturers' recommendations for best temperature
and duration for solder reflow should generally be followed, the limits listed above must not be
exceeded.
EES3 is specified for one soldering cycle only. Once EES3 is removed from the application, the
module will very likely be destroyed and cannot be soldered onto another application.
Table 37:
Reflow temperature ratings
Profile Feature
Pb-Free Assembly
Preheat & Soak
Temperature Minimum (T
Smin
)
Temperature Maximum (T
Smax
)
Time (t
Smin
to t
Smax
) (t
S
)
150°C
200°C
60-120 seconds
Average ramp up rate (T
Smax
to T
P
)
3K/second max.
Liquidous temperature (T
L
)
Time at liquidous (t
L
)
217°C
60-90 seconds
Peak package body temperature (T
P
)
245°C +0/-5°C
Time (t
P
) within 5 °C of the peak package body
temperature (T
P
)
30 seconds max.
Average ramp-down rate (T
P
to T
Smax
)
6 K/second max.
Time 25°C to maximum temperature
8 minutes max.
