09-2008
Plus 42 - 45 - 50 - 55
15
P4
P6
P12
P8
BS
BP
P7
P5
P9
P11
T6
T1
T2
T9
T5
TR
T4
E9
E10
T4
T5
®
+
-
ON
ON
OFF
OFF
Spin
Remote Control
H O
2
Press.
Pump
P1
a
P3
*
*
P13
d
b
a
c
P17
P16
P15
T7
d
b
a
c
P14
c
*
*
Versions with spray-line rinsing tank
LEGEND:
P - E = elements of the circuit
T = piping
* = For versions in which this is envisaged
Hydraulic connections diagram
TANK
SUCTION
PIPE
FILLER PIPE
(ACCESSORY)
TO THE
DISTRIBUTION
HEAD
DUST
PRODUCTS
MIXER
00678
FILTER
RETURN TO
TANK PIPE
LOADING
PIPE
SPRAY-LINE
RINSING
TANK
MIXER
PIPE
DELIVERY
PIPE
PUMP
HYDRAULIC
AGITATION
Plus 42 - 45 - 50 - 55
09-2008
54
Removal:
1. Free the tank of its hydraulic and pneumatic connections.
2. Dismantle the mobile protection cover (1) of the coupling.
3. Remove the tank securing bracket (2), undoing the 2 screws (3).
4. Undo the external nut (4) of the tie rod.
5. Tighten the internal nut (5) of the tie rod, utilising the spanner provided, moving it away from the plate.
6. Undo the tie rod from its securing point, located in the rear part of the frame. Remove it through
the large hole on the frame’s plate.
7. Remove the tank.
Installation:
1. Position the main tank on the frame.
2. Re-position the tie-rod in its seat, in other words the smaller one, first inserting it through the big
hole.
3. Tightly screw in and secure the tie rod to the rear plate of the frame.
N.B. Lock tightly and with utmost care
4. Unscrew the internal nut (5) of the tie rod, slightly tightening it against the plate.
5. Securely tighten the external nut (4) of the tie rod against the plate.
6. Reassemble the tank’s securing bracket (2), fastening it with the 2 screws (3).
Before every intervention, check the proper tightening of the 2 securing screws
of the tank’s mounting bracket..
7. Reassemble the mobile protection lid of the disengaging device, by securing it with the relevant screw.
8. Reinstate the hydraulic and pneumatic connections.
350
300
250
200
150
100
50
50 Plus
2000
00141
4
5
3
1
2