09-2008
Plus 42 - 45 - 50 - 55
33
7
ACCESSORIES
7
7.1 - FILLER PIPE
The pipe is provided with a coupling elbow fitting and with a bottom-drawing valve.
This is used for the filling of the tank.
It must be screwed into place on pump (P4) instead of the chain-held stopper.
The connection is ALWAYS to be done with the faucet (P2) closed (or P15 in position “c”) and
the faucet (P6) in position “c.”
Before making use of it, it is necessary to check the operation and the proper
sealing of the bottom-drawing valve, by pouring water into the pipe.
7.2 - PAIR OF WHEELS
The wheels thread can be adapted to that of the tractor.
MOUNT THE WHEELS AFTER HAVING HITCHED THE MACHINE TO THE THREE-POINT LINKAGE.
DISMANTLE THE WHEELS BEFORE UNHITCHING THE MACHINE FROM THE THREE-POINT
LINKAGE.
EXECUTION:
1.
Hitch the machine to the tractor and lift it to a height at which the wheels can be mounted.
2.
Stop the tractor, remove
the key from the control
panel and ensure that no
one operates the three-
point lincage’s hydraulic
controls. AVOID OPERA-
TING AND STANDING BENE-
ATH THE MACHINE OR
WITHIN THE AREA THAT MI-
GHT BE INVOLVED IN ITS
SUDDEN LOWERING.
00304
00090
P6
P15
P2
P15
P4
TR
Plus 42 - 45 - 50 - 55
09-2008
36
8
FILLING
8
FILLING MUST BE CARRIED OUT WITH THE MACHINE ON A FLAT SURFACE. ON THE SITE BEFORE
THE OPERATION, THE DOSES OR THE MIXTURES TO BE POURED INTO THE TANK MUST BE
PREDISPOSED.
IT IS NECESSARY TO ALWAYS MAKE USE OF PERSONAL PROTECTION.
8.1 - FOREWORD - USE OF THE FAN DISENGAGEMENT
(for the version where foreseen)
8.1.a Disengagement of the fan
EXECUTION:
1.
Take the sprayer to the area in which it is to be filled and rest it on the ground.
2.
Stop the tractor, remove the key from the control panel and check that the fan has
stopped
.
3.
Undo the mobile protection cap’s fixing screw and rotate it so as to access the disengagement
tunnel.
4.
Fully press the spring push button and pull the front element until it springs out. The body disengaged
from the retaining joint must turn freely: the pump will operate and the fan will thus be excluded.
5.
Reposition the mobile protection cover and fasten the locking screw properly.
6.
Start the tractor, lift the sprayer to position the universal joint shaft and carry out the filling operation.
00092
00091
DISENGAGING
ELEMENT’S
FRONTAL
TEETH
PULLEY
SPRING
PUSH BUTTON
MOBILE
PROTECTION
COVER
