CIGWELD TRANSTIG 300 AC/DC, Service Manual, Page: 93 / 134

1
4
MAINTENANCE
8 ) Remove the four screws from the PCB1 (WK-5477). Remove the seven terminals.
The cables is drawn out.
9 ) Remove the four screws and two terminals from the bottom. Remove the two screws from the rear side
and pull out the PCB14 (WK-5594). Remove the four screws and then remove the bus bar.
14.
3.12 PCB15 (WK-5606) V
1 ) Remove the Side Panel. [Reference page : 11-1]
2 ) Remove the PCB16 (WK-5569). [Reference page : 12-16]
3 ) Remove the eight screws. Remove the two PCB supporters and remove the PCB15 (WK-5606).
2
2
1
1
2
3
1
1
2
2
3
TRANSTIG 300 AC/DC SERVICE MANUAL
June 30, 2008 14-15