CIGWELD TRANSTIG 300 AC/DC, Service Manual, Page: 62 / 134

1
3
ADVANCED TROUBLESHOOTING
2 ) Remove all screws and nuts on the Side Panel.
Figure 1
3
-2: Remove screws
3 ) Loosen the screws on the front panel and the
rear panel by turning them approximately two
turns CCW.
Figure 1
3
-3: Loosen screws
NOTE
DO NOT remove the screws completely.
4) Pull the front panel slightly forward and pull the
rear panel slightly backward. The interlocking
hooks of the side case covers can now be dis-
engaged from the front and rear panels.
Figure 1
3
-4: Loosen front and rear panels
5) Remove the Side Panel.
Figure 1
3
-5: Remove Side Panel
13-2 June 30, 2008
TRANSTIG 300 AC/DC SERVICE MANUAL