CIGWELD TRANSTIG 300 AC/DC, Service Manual, Page: 32 / 134

TRANSTIG 300 AC/DC SERVICE MANUAL
4-8 June 30, 2008
Feature Description
Save/Load Function
•
A total number of 5 programs can be saved into the 300
AC/DC memory.
SAVE
the Current Weld Parameters into Memory
•
Press and HOLD the
SAVE
button. Beep will sound and
the Digital Meter will show a number 1.
•
Select a memory location by rotating the control knob,
1 to 5 is displayed on the meter.
•
After selecting the desired memory location (i.e. 1 to 5),
press the right scroll button and the machine will give a
beep to confirm the weld parameters from the control
panel are saved.
NOTE: The Save/Load buttons must be depressed for 3
seconds to store settings.
LOAD
(retrieve) a Program to Control Panel
•
Press and HOLD the LOAD button. Beep will sound and
the Digital Meter display will show a number 1.
•
Select a memory location by rotating the control knob,
1 to 5 is displayed on the meter.
After selecting the desired memory location (i.e. 1 to 5),
press the right scroll button and the machine will give a
beep to confirm the weld parameters are loaded onto the
control panel.
NOTE: The Save/Load buttons must be depressed for 3
seconds to store settings
Table 4-6:Power Source Features (con't)