CIGWELD TRANSTIG 300 AC/DC, Service Manual, Page: 30 / 134

TRANSTIG 300 AC/DC SERVICE MANUAL
4-6 June 30, 2008
4.04 Weld Parameters for Transtig 300 AC/DC
Weld HF
Parameter TIG
PRE-FLOW
0.0 to 1.0 sec 0 sec 0.1 sec No Yes Yes
HOT START
0 to 70A 20A 1A Yes Yes No
INITIAL CUR.
5 to 300A 30A 1A No Yes Yes
UP SLOPE
0 to 15 sec 1 sec 0.1 sec No Yes Yes
PULSE PEAK CUR.
5 to 300A 120A 1A No Yes Yes
PULSE BASE CUR. 5 to 300A 80A 1A No Yes Yes
WELD CUR (TIG)
5 to 300A 80A 1A No Yes Yes
WELD CUR (STICK)
5 to 300A 80A 1A Yes No No
SPOT TIME
0.5 to 5.0 sec 2 sec 0.1 sec No Yes Yes
PULSE WIDTH
15 to 80% 50% 1% No Yes Yes
PULSE FREQ.
0.5 to 500Hz 100.0Hz See Table 4-5 No Yes Yes
AC FREQUENCY 15 to 150Hz 60Hz 1Hz Yes Yes Yes
WAVE BALANCE 10 to 65% 20% 1% Yes Yes Yes
DOWN SLOPE 0 to 25 sec 3 sec 0.1 sec No Yes Yes
CRATER CUR.
5 to 300A 30A 1A No Yes Yes
POST-FLOW
0.0 to 60 sec 10 sec 0.1 sec No Yes Yes
STICK
Weld Mode
Parameter
Range
Factory
Setting
Incremental
Unit
LIFT TIG
Table 4-4: Weld Parameters for Transtig 300 AC/DC
PULSE FREQ.
Range Incremental Unit
0.5 to 20Hz 0.1Hz
20 to 100Hz 1Hz
100 to 500Hz 5Hz
Table 4-5: PULSE FREQ. Range and Incremental Units