CIGWELD TRANSTIG 300 AC/DC, Service Manual, Page: 101 / 134

1
4
MAINTENANCE
14.
3.21 Coupling Coil (CC1)
UV
1 ) Remove the Side Panel. [Reference page : 11-1]
2 ) Remove the gas tube. Remove the two bolts, and one terminal.
Remove the four screws and open the front cabinet.
3 ) Remove the two terminals. Remove one screw, four terminals, and one nut.
Remove one screw and detach the coupling coil (CC1).
14.
3.22 Inductor (FCH1)
UV
1 ) Remove the Side Panel. [Reference page : 11-1]
2 ) Remove the high frequency unit (HF.UNIT1). [Reference page : 12 -28]
3 ) Remove the coupling coil (CC1). [Reference page : 12-23]
4 ) Remove the PCB16 (WK-5569). [Reference page : 12-16]
5 ) Remove the PCB20 (WK-5499). [Reference page : 12-17]
6 ) Remove the three screws and three terminals.
3
3
3
3
4
2
1
1
2
2
1
2
3
TRANSTIG 300 AC/DC SERVICE MANUAL
June 30, 2008 14-23