CiA TVV420S, Installation And Operating Manual

Page: 23 / 40

- 23 -
11. Other Conditions
To set the other conditions, press the MENU button to display the Menu.
- Use the direction button [ (Up), (Down)] to select the Other Conditions.
- Press the ENTER button to display the Other Conditions menu on the monitor.
Figure 2-14. Other Conditions
1. To set the duration time for Auto Switching and Seq PIP Mode, use the direction button
[ (Up), (Down)] to select the Auto Switch.
- To change the auto switching time, use the direction button [ (Left), (Right)].
Auto Switching Time Mode : 1, 2, 3, 4, 5, 6, 7, 8, 9sec
2. To display camera name on the monitor, use the direction button [ (Up), (Down)]
to select the Camera Name.
- To select ON or OFF, use the direction button [ (Left), (Right)].
3. To display date and time on the monitor, use the direction button [ (Up), (Down)]
to select the Date/Time.
- To select ON or OFF, use the direction button [ (Left), (Right)].
4. To set the 1 channel audio recording [30fps recording only], use the direction
button [ (Up), (Down)] to select the Audio Mute.
- To select ON or OFF, use the direction button [ (Left), (Right)].
If user select ‘ON’, DVR will not record audio when you set record speed
30frame/sec only.
5. To set the HDD overwrite when HDD was full with recording data, use the direction
button [ (Up), (Down)] to select the HDD Overwrite.
- To select ON or OFF, use the direction button [ (Left), (Right)].
If user select ‘ON’, automatically, DVR will overwrite HDD after filling it up
6. To delete the all of the data on Search List, use the direction button [ (Up), (Down)]
to select the List Erase.
- To select YES or NO, use the direction button [ (Left), (Right)].
If you select ‘YES’ of this menu, all of the data on the list from HDD [Motion time,
Alarm time, Display information of recording data] will be removed.
7. To change the DVR setting data to default data, use the direction button
[ (Up), (Down)] to select the Factory Set.
- To select ON or OFF, use the direction button [ (Left), (Right)].
8. Press the MENU button to exit the programming mode.
12. Information
To check the HDD and System information, press the MENU button to display the Menu.
- Use the direction button [ (Up), (Down)] to select the Information.
- Press the ENTER button to display the Information menu on the monitor.