- 25 -
- This product can record video signal of asynchronous up to 4.
- Connect cameras, monitor, audio equipment and power cord to DVR system.
(DVR system connections refer to Installation section.)
- Press the POWER button on the rear of the DVR to turn on the system
- Video signal from all 4 cameras display on the monitor.
1. Live Mode
Figure 3-1.
Live Mode
- The each camera name is displayed on the screen, depending on the setting of the
Camera Name menu and Camera Name sub menu of Other Conditions menu.
- The time and date is displayed on the screen, depending on the setting of the
Date/Time Setup menu and Date/Time sub menu of Other Conditions menu.
- The speaker mark is displayed on the screen, depending on the setting of the Audio
Mute menu of Other Conditions menu.
- The HDD sector No. is displayed on the screen.
This DVR system will divide HDD 0000 ~ 9999 without regard to HDD size.
(Refer to Playback Mode in the System Operation section.)
- The HDD information OSD is displayed on the screen, depending on the setting the
Information menu.
- If there is loss video signal, ‘VIDEO LOSS’ appears on the screen and buzzer is
alarming.
2. Zoom Mode
You can operate the ZOOM button in live mode(full screen, quad screen, PIP1, PIP2,
sequence PIP) or playback mode.
You cannot operate the ZOOM button when a menu or search list are displayed on the
monitor.
The button doesn’t work when DVR is recording mode, pan/tilt/zoom control mode,
auto mode and freeze mode.
. SYSTEM OPERATION
Summary of Contents for TVV420S
Page 40: ...40...
