CiA TVV420S, Installation And Operating Manual

Page: 18 / 40

- 18 -
6. Alarm Setup
To set the record condition, press the MENU button to display the Menu.
- Use the direction button [ (Up), (Down)] to select the Alarm Setup.
- Press the ENTER button to display the Alarm Setup menu on the monitor.
Figure 2-6. Alarm Setup
*Alarm In : This DVR system are 4ch of sensor[Alarm1 ~ Alarm4] input ports in rear side
of DVR. If user use the external sensor with DVR System, have to select the
type of sensor[High(NC)/Low(NO)] and ‘ON’, otherwise select ‘OFF’. [DVR
receive High Level Signal in Normal Status]
*Alarm Out : Also, DVR has 1ch of out port which give a signal to work external equipment.
[light, door lock. Siren…]
1. To set the alarm mode for camera 1, use the direction button [ (Up), (Down)] to
select the Alarm1.
- To change the alarm mode, use the direction button [ (Left), (Right)].
Alarm mode : OFF, L/ON, H/ON
2. To set the alarm mode for camera 2, use the direction button [ (Up), (Down)] to
select the Alarm2.
- To change the alarm mode, use the direction button [ (Left), (Right)].
Alarm mode : OFF, L/ON, H/ON
3. To set the alarm mode for camera 3, use the direction button [ (Up), (Down)] to
select the Alarm3.
- To change the alarm mode, use the direction button [ (Left), (Right)].
Alarm mode : OFF, L/ON, H/ON
4. To set the alarm mode for camera 4, use the direction button [ (Up), (Down)] to
select the Alarm4.
- To change the alarm mode, use the direction button [ (Left), (Right)].
Alarm mode : OFF, L/ON, H/ON
5. To set the alarm out, use the direction button [ (Up), (Down)] to select the
Alarm Out.
- To change the alarm out mode, use the direction button [ (Left), (Right)].
Alarm out mode : ON, OFF
6. To set the alarm recording time, use the direction button [ (Up), (Down)] to select
the Rec Time.
- To change the alarm recording time, use the direction button [ (Left), (Right)].
Alarm Recording Time : 2S, 5S, 10S, 30S, 1M, 2M, 3M, 5M, 10M, 30M
7. Press the MENU button to exit the programming mode