22
21
Stay Mode
Input user code or admin code, and press
key,
the LED indicator flashes once and the keypad beeps once
and sends Stay Mode command to the control panel.
[Stay Mode]
When the alarm panel receives the signal, the siren will beep
once and the Stay Mode indicator will light on, the alarm
system enters stay mode state.
All the sensors in other zones are armed to prevent the
intruder except that the motion detector in Home Mode Zone
is disarmed, so that people can move freely at home.
Home Mode Zone
(Jumpers setting for accessories)
Emergency Call
When the keypad is in Speed SOS Dial mode, user just holds
the
key for 3 seconds, the LED indicator flashes once,
the keypad beeps once, and the control panel alarms
immediately.
[SOS]
When the keypad is not in Speed SOS Dial mode, user needs
to input user code or admin code before holding the
key for 3 seconds to send an alarm.
[SOS]
Mute Mode
Mute mode means that the LED indicators of control panel
flash, but the siren does not beep, to avoid disturbing the
neighborhood.
Input user code or admin code, and hold any key of
for 2 seconds, the LED indicator
flashes once, the keypad beeps once and sends
corresponding command to the control panel.
[Arm]
[Disarm] [Stay Mode]
When the alarm panel receives
the signal, the LED indicator
lights on or off, but the siren
does not beep.