18
17
Change Admin Code
Using admin code can wake up keypad, send Arm, Disarm,
Stay Mode commands to the control panel, and also change
any settings of the keypad.
To avoid passcode reveal, please change admin code for first
time.
Change Admin Code
Enter setup state, input:
When one beep is heard and the LED indicator keeps on for
10 seconds, the setup is successful.
Note!
Admin code is 6 digits; default code is “123456”.
Reset
After reset, the user code, admin code, and other settings will
restore to default except that the connected RFID tags can
still disarm and open electronic door lock.
Enter setup state, input:
When one beep is heard and the LED indicator keeps on for
10 seconds, the setup is successful.
0
9
new admin code
