16
15
Power Saving Mode
If the keypad is powered by batteries, power saving mode is
recommended. In power saving mode, the keypad is in
sleeping status when standby, user needs to press
to wake
up the keypad and then put RFID tag close to the reader to
disarm or unlock the door.
[*]
Turn on Power Saving Mode
Enter setup state, input:
When one beep is heard and the LED indicator keeps on for
10 seconds, the setup is successful.
Turn off Power Saving Mode
If the keypad is powered by DC 12V power, normal mode is
recommended. User can disarm the system by RFID tag
directly, which is more convenient.
Enter setup state, input:
When one beep is heard and the LED indicator keeps on for
10 seconds, the setup is successful.
Note!
Default setting: 0, turn on power saving mode. User needs to
press [*] to wake up the keypad and then put RFID tag close to the
reader to disarm or unlock the door.
Change User Code
Using user code can wake up keypad, open electronic door
lock, or send Arm, Disarm, Stay Mode commands to the
control panel.
To avoid passcode reveal, please change user code when first time use.
Change User Code
Enter setup state, input:
When one beep is heard and the LED indicator keeps on for
10 seconds, the setup is successful.
Note!
User code is 4 digits; default code is “1234”.
7 0
7 1
8
new user code
