Chrysler Crossfire 2007 Owner'S Manual Download Page 35 | Manualshive

Page: 35 / 299

background image

WARNING!

Ignoring the AIRBAG light in your instrument panel
could mean you won’t have the airbags to protect you
in a collision. If the light does not come on, stays on
after you start the vehicle, or if it comes on as you
drive, have the airbag system checked right away.

WARNING!

Do not put anything on or around the airbag covers
or attempt to manually open them. You may damage
the airbags and you could be injured because the
airbags are not there to protect you. These protective
covers are designed to open only when the airbags
are inflated.

•

The Driver and Passenger Airbag/Inflator Units are
located in the center of the steering wheel and the right
side of the instrument panel. When the ORC detects a
collision requiring the airbags, it signals the inflator
units. A large quantity of nontoxic gas is generated to
inflate the front airbags. Different airbag inflation rates
may be possible based on collision severity and occu-
pant size. The steering wheel hub trim cover and the
upper right side of the instrument panel separate and
fold out of the way as the bags inflate to their full size.
The bags fully inflate in about 50–70 milliseconds. This
is about half of the time it takes to blink your eyes. The
bags then quickly deflate while helping to restrain the
driver and front passenger. The driver’s front airbag
gas is vented through vent holes in the sides of the
airbag. The passenger’s front airbag gas is vented
through vent holes in the sides of the airbag. In this
way the airbags do not interfere with your control of
the vehicle.

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

35

2

«
...
33
34
35
36
37
...
»

Summary of Contents for Crossfire 2007












































































































































































































































































































Reviews:

No comments

Related manuals for Crossfire 2007

Brand: Back View Pages: 168

Brand: Fabbri Pages: 4

FRONT HEADLIGHT LENS COVER

Brand: Bimmer Jakes Pages: 4

Sterling ALL-TERRAIN 576

Brand: Roadmaster Pages: 12

Ferrari 360 Map Carbon Light

Brand: MAcarbon Pages: 4

Brand: Honda Pages: 20

2009 Rio Series

Brand: Kia Pages: 219

Brand: U.S. General Pages: 8

Brand: Rugged Ridge Pages: 2

Perfect Fit MBM120

Brand: Waeco Pages: 3

Brand: Or-Fab Pages: 4

Brand: Lexus Pages: 830

Brand: PUTCO Pages: 3

Brand: Rydeen Pages: 14

Brand: Summit Racing Pages: 11

Brand: Hyundai Pages: 168

Brand: Porsche Pages: 127

Multi Vehicle Mount MVM-35-05

Brand: Bracketron Pages: 4

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands