manualshive.com logo in svg

Chrysler Crossfire 2007, Owner'S Manual

The Chrysler Crossfire 2007 Owner's Manual is a comprehensive guide that provides in-depth information on operating, maintaining, and troubleshooting this sleek and stylish vehicle. Enhance your driving experience by downloading this manual for free from manualshive.com and get full access to valuable insights and instructions.

Share
Download
background image

The red markings on the tachometer indicate excessive
engine speed. Ease off on the accelerator before reaching
the red area.

10. Brake System Warning Light

The dual brake system provides a reserve
braking capability if a failure occurs in a

portion of the hydraulic system.

This light monitors both the brake fluid level and the
parking brake. If the light comes on, it indicates either
that the parking brake is on or there is a low fluid level in
the brake master cylinder. Since this vehicle is equipped
with anti-lock brakes (ABS), the brake light may also
indicate reduced braking performance due to the loss of
electronic brake proportioning. If the parking brake is off
and the light remains on, have the brake system in-
spected as soon as possible.

The warning light should be checked frequently to assure
that it is operating properly. This can be done by turning
the ignition switch to START. The light should come on.
If the red brake light does not come on when the ignition
is turned to the ON/RUN position, have the brake
warning light repaired promptly.

WARNING!

Driving a vehicle with the brake light on is danger-
ous. Part of the brake system may have failed. It will
take longer to stop the vehicle. You could have an
accident. Have the vehicle checked immediately.

NOTE:

This light shows only that the parking brake is

on. It does not show the degree of brake application.

The brake warning light will come on if the ABS light is
not functioning and there is an ABS system malfunction.

11. Light Outage Indicator

With the key in the ignition switch turned to
the ON/RUN position, an indicator light
comes on. It should go out when the engine
is running. If the indicator light does not go

out after starting the engine, or if it comes on while
driving, it indicates a failure in the parking light,
taillight, stoplight, low beam headlight, or other exte-
rior lamps.

UNDERSTANDING YOUR INSTRUMENT PANEL

117

4

Summary of Contents for Crossfire 2007












































































































































































































































































































Reviews:

No comments

Related manuals for Crossfire 2007

Lange Originals HOIST-A-TOP JL CRANK Installation Instructions Manual preview
HOIST-A-TOP JL CRANK
Brand: Lange Originals Pages: 13
FABBRI PORTATUTTO 17405400 Assembly Instructions preview
17405400
Brand: FABBRI PORTATUTTO Pages: 2
HUSKY LINERS X-ACT CONTOUR 53491 Care And Use Instructions preview
X-ACT CONTOUR 53491
Brand: HUSKY LINERS Pages: 2
Volvo 30728293 Installation Instructions Manual preview
30728293
Brand: Volvo Pages: 19
Camcar 40108 Mounting Instructions preview
40108
Brand: Camcar Pages: 6
ABL eMH3 Quick Start Manual preview
eMH3
Brand: ABL Pages: 4
Thule 1511 Instructions Manual preview
1511
Brand: Thule Pages: 8
Lexus LX 470 Owner'S Manual preview
LX 470
Brand: Lexus Pages: 369
Mountain Top Sports Bar Installation Manual preview
Sports Bar
Brand: Mountain Top Pages: 12
Phonocar 4/084 Mounting Instructions preview
4/084
Brand: Phonocar Pages: 2
Havis-Shields 1997-2007 Dodge Dakota Telescoping Computer Base C-TCB-28 Install Instructions preview
1997-2007 Dodge Dakota Telescoping Computer Base C-TCB-28
Brand: Havis-Shields Pages: 3
Mazda 2006 RX-8 Service Highlights preview
2006 RX-8
Brand: Mazda Pages: 122
Hyundai SANTA FE 2020 Getting Started Manual preview
SANTA FE 2020
Brand: Hyundai Pages: 19
Tesla MODEL Y Owner'S Manual preview
MODEL Y
Brand: Tesla Pages: 274
GYS 029422 Manual preview
029422
Brand: GYS Pages: 32
CARFACE CF145962E Instruction Manual preview
CF145962E
Brand: CARFACE Pages: 16
Hyundai 2001 Elantra Owner'S Manual preview
2001 Elantra
Brand: Hyundai Pages: 168
CITROEN 1953 Traction Avant User Manual preview
1953 Traction Avant
Brand: CITROEN Pages: 26

Brands by name

Popular brands

Load more brands