manualshive.com logo in svg

Chrysler Crossfire 2007, Owner'S Manual

The Chrysler Crossfire 2007 Owner's Manual is a comprehensive guide that provides in-depth information on operating, maintaining, and troubleshooting this sleek and stylish vehicle. Enhance your driving experience by downloading this manual for free from manualshive.com and get full access to valuable insights and instructions.

Share
Download
background image

CONVERTIBLE TOP CARE

CAUTION!

Due not use sharp-edged instruments to remove
snow or ice from the soft top.

NOTE:

Place a suitable cover over the top if you are

going to park the vehicle outside for a extended period of
time.

Immediate removal of any contaminant is recommended.
Regular washing of the top will enhance its life and
appearance, and make successive cleanings easier. Do not
subject the top to excessive heat. Frequently vacuum the
top and cargo compartment divider.

Washing

CAUTION!

•

Remove bird droppings immediately. The organic
acid can damage the material and cause the top to
leak.

•

Never use a power washer to clean the top, as you
may damage the top material.

•

If an automatic car wash is used, never use
hot-wax.

Hand washing is highly recommended. Automatic car
washing equipment can damage the top material. If you
must use an automatic car wash, soft cloth systems are
preferred.

MAINTAINING YOUR VEHICLE

251

7

Summary of Contents for Crossfire 2007












































































































































































































































































































Reviews:

No comments

Related manuals for Crossfire 2007

JANE be cool boosty Manual preview
be cool boosty
Brand: JANE Pages: 21
Porsche 911 GT3R 2010 Technical Manual preview
911 GT3R 2010
Brand: Porsche Pages: 144
Quadratec Brute Strength 12057.0271 Installation Manual preview
Brute Strength 12057.0271
Brand: Quadratec Pages: 6
Chrysler Stratus LHD 1997 Interactive Electronic Service Manual preview
Stratus LHD 1997
Brand: Chrysler Pages: 1534
BendPak Autostacker PL-6SR Installation And Operation Manual preview
Autostacker PL-6SR
Brand: BendPak Pages: 104
Lexus HS 250h Vehicle Dismantling Manual preview
HS 250h
Brand: Lexus Pages: 34
Toyota 86 2020 Quick Reference Manual preview
86 2020
Brand: Toyota Pages: 32
Thule 1809 Instruction Manual preview
1809
Brand: Thule Pages: 4
WABCO TP19039 Manual preview
TP19039
Brand: WABCO Pages: 34
Safe Fleet PRIME DESIGN HRR3-E-PM42 Manual preview
PRIME DESIGN HRR3-E-PM42
Brand: Safe Fleet Pages: 12
N.R. AUTOSEATS Top User Manual preview
Top
Brand: N.R. AUTOSEATS Pages: 8
Waeco Perfect Fit MBM120 Installation Instructions preview
Perfect Fit MBM120
Brand: Waeco Pages: 3
Or-Fab HD Bumper Installation Instructions preview
HD Bumper
Brand: Or-Fab Pages: 4
Master Tailgaters MR-43E2DVR1 User Manual preview
MR-43E2DVR1
Brand: Master Tailgaters Pages: 10
Seat Toledo 2019 Owner'S Manual preview
Toledo 2019
Brand: Seat Pages: 300
Honda 2010 Accord Coupe Owner'S Manual preview
2010 Accord Coupe
Brand: Honda Pages: 410
Westin 33-1920 Instructions preview
33-1920
Brand: Westin Pages: 3
Ecco Nova Electronics Hide-a-Led DEUCE DUAL HEAD W600 Manual preview
Nova Electronics Hide-a-Led DEUCE DUAL HEAD W600
Brand: Ecco Pages: 2

Brands by name

Popular brands

Load more brands