manualshive.com logo in svg

Chrysler Crossfire 2007, Owner'S Manual

The Chrysler Crossfire 2007 Owner's Manual is a comprehensive guide that provides in-depth information on operating, maintaining, and troubleshooting this sleek and stylish vehicle. Enhance your driving experience by downloading this manual for free from manualshive.com and get full access to valuable insights and instructions.

Share
Download
background image

The indicator light will come on when the exterior light
fails. If a brake light fails, the light outage indicator will
come on when applying the brake and stays on until the
engine is turned off.

NOTE:

If additional lighting equipment is installed

(e.g., auxiliary headlights, etc.) be certain to connect into
the fuse before the failure indicator monitoring unit in
order to avoid damaging the system.

12. Antilock Warning Indicator Light

The ABS warning indicator light comes on
with the key in the ignition switch turned to
the ON/RUN position, and should go out
with the engine running.

If the ABS warning indicator light comes on while the
engine is running, it indicates that the ABS has detected
a malfunction and has switched off. In this case, the brake
system functions in the usual manner, but without an-
tilock assistance.

If the ABS light is on, have the system checked at your
authorized dealer as soon as possible.

13. Brake Assist Indicator Light

The indicator light for the Brake Assist Sys-
tem (BAS) is combined with the Electronic
Stability Program (ESP). This yellow indica-

tor light in the instrument cluster comes on with the
key in the ignition switch turned to the ON/RUN
position. The BAS/ESP warning indicator light also
comes on when a malfunction is detected in either the
Brake Assist System or the Electronic Stability Pro-
gram. It should go out with the engine running. If the
BAS/ESP indicator light comes on continuously, see
an authorized dealer as soon as possible.

14. Seat Belt Indicator Light

With the key in the ignition, the light comes
on, and a warning sounds for a short time if
the driver’s seat belt is not fastened.

After starting the engine, the seat belt indicator light
blinks and a chime sounds periodically for up to 90
seconds to remind the driver and passenger to fasten the
seat belts. Fastening the seat belts will extinguish the
light and silence the chime.

118

UNDERSTANDING YOUR INSTRUMENT PANEL

Summary of Contents for Crossfire 2007












































































































































































































































































































Reviews:

No comments

Related manuals for Crossfire 2007

OEM Tools 22505 Operating Instructions And Parts Manual preview
22505
Brand: OEM Tools Pages: 4
RAM 2015 1500 User Manual preview
2015 1500
Brand: RAM Pages: 292
RAM Trucks 1500 User Manual preview
Trucks 1500
Brand: RAM Pages: 116
Porsche 911 GT3R 2010 Technical Manual preview
911 GT3R 2010
Brand: Porsche Pages: 144
Volvo 1996 960 Quick Tips preview
1996 960
Brand: Volvo Pages: 10
BURY CC 9040 Specification preview
CC 9040
Brand: BURY Pages: 2
Ecco EC4210B-K Installation And Operation Instructions Manual preview
EC4210B-K
Brand: Ecco Pages: 9
Metra Electronics 99-5819 Installation Instructions Manual preview
99-5819
Brand: Metra Electronics Pages: 8
Hyundai Entourage 2008 Quick Reference Manual preview
Entourage 2008
Brand: Hyundai Pages: 11
Kia Picanto Manual preview
Picanto
Brand: Kia Pages: 680
Anker Technology Roav VIVA Owner'S Manual preview
Roav VIVA
Brand: Anker Technology Pages: 8
PEUGEOT BOXER 2018 Handbook preview
BOXER 2018
Brand: PEUGEOT Pages: 232
Brigade VBV-770-310 Quick Installation Manual preview
VBV-770-310
Brand: Brigade Pages: 12
Autoplugin RCP-B1 Installation Manual preview
RCP-B1
Brand: Autoplugin Pages: 8
Metra Electronics 95-7322 Installation Instructions Manual preview
95-7322
Brand: Metra Electronics Pages: 16
Prorack K890 Fitting Instructions Manual preview
K890
Brand: Prorack Pages: 15
ACV 381178-12 Installation Manual preview
381178-12
Brand: ACV Pages: 2
Honda 2004 Civic Si Owner'S Manual preview
2004 Civic Si
Brand: Honda Pages: 219

Brands by name

Popular brands

Load more brands