Chroma 62000D Series, Operating And Programming Manual

Page: 135 / 180

Remote Operation
5-9
Parameter: 0 to 255
Example: *ESE 48 This command enables the CME and EXE events
of the Standard Event Status Event register.
Query Syntax: *ESE?
Return Parameter: <NR1>
Query Example: *ESE?
This query returns current setting of Standard
Event Status Enable.
*ESR? Standard Event Status Register
Type: Device status
Description: This query reads the Standard Event Status register and clears it.
Query Syntax: *ESR?
Return Parameter: <NR1>
Query Example: *ESR?
Return status readings of Standard Event Status register.
Return Example: 48
*IDN? Identification Query
Type: System interface
Description: This query requests the power supply to identify itself.
Query Syntax: *IDN?
Query Example: *IDN?
String Description
CHROMA ATE Manufacturer
62180D-600 Model name
123456 Serial No.
01.00 Firmware version
Return Example: Chroma,62180D-600, 96218030123456,1.00
*OPC
Operation Complete Command
Type: Device status
Description: This command causes the interface to set the OPC bit (bit 0) of the
Standard Event Status register when the DC power supply has
completed all pending operations.
Syntax: *OPC
Parameter: None
*OPC? Operation Complete Query
Type: Device status
Description: This query
returns an ASCII “1” when all pending operations are
completed.
Query Syntax: *OPC?
Return Parameter: <NR1>
Query Example: 1
*RCL Recall Instrument State Command
Type: Device status
Description: This command restores the High Slew Rate Load to a state that was
previously stored in memory with the *SAV command to the specified
location (see *SAV).
Syntax: *RCL <NR1>
Parameter: None
Example: *RCL 1
*RST Reset Command