Christini AWD 250, Service Manual

Page: 14 / 124

Page 13
This motorcycle uses a capacitor discharge ignition system
(CDI). The ignition system should never require adjustment
unless the stator of the magnetic flywheel was incorrectly
installed during engine reassembly. If necessary, inspect
and adjust as follows:
Adjustment
Adjustment Adjustment Adjustment
- Remove the magnetic flywheel cover.
- Make sure that the mark on the stator plate is aligned with
the mark on the crankcase.
- If the marks are not aligned, loosen the magnetic inertia
wheel screws and turn it.
- Tighten the screws securely.
- Install the magnetic flywheel cover.
NOTE NOTE NOTE NOTE
Engine tune-up can be adjusted to match the rider´s preferences and skills.
- Remove the magnetic flywheel cover.
- Loosen the stator screws.
- Adjust the engine tune-up by changing the position of the stator within prudent limits
NOTE NOTE NOTE NOTE
For the best engine performance, it is very important to adjust the engine tune-up within the set of limits
described.
- Tighten the stator screws.
- Install the magnetic flywheel cover.
- Test ride the motorcycle and readjust the engine tune-up, if necessary.
Electronic Ignition