Service setups
Understand the special internal hardware and software adjustments and related details that may
require the attention of a qualified service technician, whether done periodically or after a specific
module replacement.
Optical adjustments are not considered maintenance. The lamps are turned on during optical
adjustments and UV emissions are present.
Turning the projector on
When the projector AC power supply is plugged in, the power is on.
Warning! Failure to comply with the following could result in death or serious injury.
•
SHOCK HAZARD! Do not attempt operation if the AC supply is not within the specified voltage
and power range, as specified on the license label.
1. Plug the projector in to AC power.
The projector automatically powers on when plugged in. The side panel display functionality
becomes available.
2. To turn the lamps on, press and hold the Power button until you hear a beep.
Turning the projector off
When powering off in preparation for inspection or maintenance, always disconnect from AC.
1. To turn the lamps off, press and hold the Power button until you hear a beep.
When powering off the projector, allow the projector to complete its cool down cycle. Do not
immediately unplug the projector if this can be avoided.
2. To turn off power to the projector, disconnect from AC power.
Adjusting horizontal boresight
Boresight adjustment balances the tilt of the lens mount to compensate for screen-to-projector tilt.
Warning! Failure to comply with the following could result in death or serious injury.
•
UV EXPOSURE! Protective UV safety glasses with side shields and Christie approved protective
safety clothing must be worn when performing optical adjustments or servicing the product.
•
EXTREME BRIGHTNESS! Do not place reflective objects in the product light path.
Roadie 4K35 and 4K45 Service Manual
22
020-101694-03 Rev. 1 (01-2016)
Copyright
©
2016 Christie Digital Systems USA Inc. All rights reserved.