Warning! Failure to comply with the following could result in death or serious injury.
•
Possibly hazardous optical radiation emitted from this product. (Risk group 3)
•
Thermal radiation emitted from this product may cause burns. (Risk group 3)
Product safety labels
Learn about the safety labels used on the projector.
Indicates the presence of a grounding point.
Indicates the presence of an earth grounding point.
Indicates the presence of a dangerous condition or situation.
Indicates the presence of a pinch hazard. To avoid personal injury, keep hands clear and loose clothing
tied back.
Indicates the presence of a hot surface. To avoid personal injury, always allow the projector to cool
down for a minimum of 10 minutes before performing maintenance or service procedures.
Indicates the presence of a hot surface. To avoid personal injury, always allow the projector to cool
down for a minimum of 10 minutes before performing maintenance or service procedures.
Indicates the presence of an electrical shock hazard. To avoid personal injury, always disconnect all
power sources before performing maintenance or service procedures.
Indicates the presence of an electrocution hazard. To avoid personal injury, always disconnect all
power sources before performing maintenance or service procedures.
Indicates the presence of moving fan blades. To avoid personal injury, keep hands clear and loose
clothing tied back. Always disconnect all power sources before performing maintenance or service
procedures.
Indicates exposure to bright light. To avoid personal injury, never look directly at the light source.
Indicates the presence of an explosion hazard. To avoid personal injury, always disconnect all power
sources and wear Christie approved protective clothing.
Service guidelines
Roadie 4K35 and 4K45 Service Manual
14
020-101694-03 Rev. 1 (01-2016)
Copyright
©
2016 Christie Digital Systems USA Inc. All rights reserved.