Operation
Learn how to operate the projector.
Projector LED status indicators
Identify the LED state colors and meaning.
LED
State
Description
Solid Green
On
Video electronics are on, the lamp is on.
Solid Yellow
Standby mode
Video electronics are off, lamp is off.
Solid Green, Yellow and Red
AC is on
MCPU board software has not started
initialization.
Flashing Green
Warm up
Video electronics are initializing, lamp is
striking and warming up.
Flashing Yellow
Cool down
Lamp is off, video electronics and lamp are
cooling down.
Flashing Red
Alarm or warning preset
Problem with the projector must be
addressed.
Flashing Green and Yellow
AC on to standby
MCPU board software has started
initialization.
Turning the projector on
When the projector AC power supply is plugged in, the power is on.
Warning! Failure to comply with the following could result in death or serious injury.
•
SHOCK HAZARD! Do not attempt operation if the AC supply is not within the specified voltage
and power range, as specified on the license label.
1. Set all the breaker switches on the lamp power supply to their on positions.
2. Set the breaker switch on the projector baseplate to the on position.
3. When the projector reaches standby, on the touch panel controller, tap Home > Power.
Roadie 4K35 Quick Start Guide
32
020-101671-04 Rev. 1 (01-2016)
Copyright
©
2016 Christie Digital Systems USA Inc. All rights reserved.
