8. Calibrate the lens motors.
Orienting the projector in portrait mode
Change the orientation of the projector to portrait.
1. Install the projector in the Roadie 4K frame (P/N: 129-115108-XX) according to the
installation instructions provided with the frame.
2. Orient the projector in the frame with the lamp door facing downward (as shown).
The maximum tilt angle is ±15 degrees.
3. Perform a lamp alignment.
Do not transfer the projector in portrait mode orientation. Return the projector to landscape
orientation before moving.
Installation and Setup
Roadie 4K35 Quick Start Guide
26
020-101671-04 Rev. 1 (01-2016)
Copyright
©
2016 Christie Digital Systems USA Inc. All rights reserved.
