Connecting devices
Learn the information and procedures for connecting external devices to the projector.
Communication and input ports are located on the projector side input panel. When connecting
devices, you can route cables through the opening in the frame to the side input panel or directly to
the video option cards and MCPU. The image below shows the video option card slot numbers and the
MCPU panel.
Input signal devices are connected to the video option cards and the option card slot numbers are
important for some types of input signals. Communication devices are connected at the MCPU panel.
SLOT 1
SLOT 2
SLOT 4
SLOT 3
MCPU
Input video mapping
Video input mapping depends on the type of cards used for the Four-Port or Two-Port input
configurations.
Four-Port: 3GIC, TDPIC, THIC cards
View the video quadrant mappings for the 3GIC, TDPIC, and THIC Four-Port input configurations.
Four-Port input configuration—Two cards (1)
Quadrant
Columns
Slot 1
1-In
Top left
1 (left most)
Slot 1
2-In
Bottom left
2
Slot 2
1-In
Top right
3
Slot 2
2-In
Bottom right
4
Four-Port input configuration—Two cards (2)
Quadrant
Columns
Slot 3
1-In
Top left
1 (left most)
Slot 3
2-In
Bottom left
2
Roadie 4K35 Quick Start Guide
27
020-101671-04 Rev. 1 (01-2016)
Copyright
©
2016 Christie Digital Systems USA Inc. All rights reserved.
