Adjusting the distance between the display panel
and the wall mount
Use the adjustment wheel to move the display panel further from or closer to the wall.
1. To move the corner out from the wall mount, turn the adjustment wheel clockwise.
2. To move the corner towards the wall mount, turn the adjustment wheel counter-clockwise.
Moving the display panel up and down
Use the height adjustment screw to move the display panel up and down.
1. To raise a side, turn the height adjustment screw clockwise.
2. To lower a side, turn the height adjustment screw counter-clockwise.
Extending the adapter brackets
To access the rear of the panel, pull the panel away from the wall mount and fully extend the brackets.
Directly after servicing the panel, close the brackets and return the panel to the original position.
To avoid damaging the panel during servicing, follow the handling and mounting guidelines.
1. To pull the LCD panel away from the wall mount, lift up on the handles.
The pull handles are located an the top side of each of the left and right brackets of the mount.
To access the locking tabs for a mount, it may be necessary to extend the adapter brackets of
the LCD panels above it.
To avoid damaging the LCD panel always release both locking tabs at the same time and move
the panel forwards evenly.
Installing flat panels on the ML25 wall mount
Installing Flat Panels on the ML25 Wall Mount Instruction Sheet
11
020-001812-01 Rev. 1 (04-2020)
Copyright
©
2020 Christie Digital Systems USA, Inc. All rights reserved.
