•
To avoid putting undue stress on the panel when mounted, make sure the mount is square,
flat, and level.
•
Do not rest panels on top of a lower panel.
•
When inserting the panel into the wall, pay close attention to adjacent panels.
•
Make sure there is a minimum of 0.5 mm between mounted panels to allow for thermal
expansion.
Types of installations
Learn the supported surfaces for installing the wall mounts.
Required parts
Learn the parts necessary for installing the wall mounts.
A
Nut (Qty. 4)
H
Left vertical
B
Spacer (Qty. 8)
I
4mm pin hex wrench (Qty. 1)
C
M8 x 15 mm socket pin screw (Qty. 8)
J
#14 x 2.5" wood screw (Qty. 5)
D
Adapter bracket (Qty. 2)
K
Concrete anchors (Qty. 5)
E
Cross bars for 49" and 55" panels (Qty. 2)
L
Cross bars for 65" panels (Qty. 2)
F
Washer (Qty. 4)
M
Pull handle for 65" panels
G
Right vertical
Installing flat panels on the ML25 wall mount
Installing Flat Panels on the ML25 Wall Mount Instruction Sheet
3
020-001812-01 Rev. 1 (04-2020)
Copyright
©
2020 Christie Digital Systems USA, Inc. All rights reserved.
