3. Secure each end of the top cross bar and vertical supports with a nut and rectangular washer.
4. Before tightening the washer and nut, adjust the width of the wall mount to the size of the LCD
panel.
For the FHD493-XE panel, the wall mount must be fully collapsed. For the FHD553-XE panel,
the wall mount must be fully expanded.
5. Tighten the washer and nuts.
6. Repeat steps 2 to 5 for the bottom cross bar.
Installing the wall mount
Learn how to install the wall mounts onto different surfaces.
The maximum load capacity of the wall mount is 75 lbs (34 kg).
When installing the wall mounts, ensure there is proper spacing between the mounts to accommodate
the panels. Always start with the bottom left display panel in the array.
1. Measure the width and height of the display panel.
2. Locate the center of the bottom left display panel in the array.
3. Install all wall mounts in the bottom row according to the instruction for the mounting surface.
Install all rows starting with the far left display panel.
4. Install the next row of display panels.
a) Measure the height of a display panel.
To allow for display panel adjustments, include additional space in the measurement.
b) From the notch in the wall mount of the left display panel in the bottom row, measure
upwards the height of the display panel and mark the location.
This is the notch location for the first wall mount of the second row.
c) Install the wall mounts for all display panels in the next row of display panels.
Installing flat panels on the ML25 wall mount
Installing Flat Panels on the ML25 Wall Mount Instruction Sheet
6
020-001812-01 Rev. 1 (04-2020)
Copyright
©
2020 Christie Digital Systems USA, Inc. All rights reserved.
