Port
Description
Audio Out
Not supported.
HDBaseT
Accepts video signals, Ethernet, and IR.
USB 1/USB 2
Connects a USB flash drive that has been formatted with a FAT32
file system. Can be used for upgrades, backups, restores,a nd
interrogators.
USB 3
For manufacturing use only.
Wired Keypad
Physically connects a remote control to the projector.
3D Sync In/3D Sync Out
Supported for 3D-enabled projectors.
Ethernet
Connects to the web user interface and can send Christie serial
commands.
RS232
Sends Christie serial commands using a standard RS232 serial
cable.
GPIO
Provides a method for controlling the projector using electrical
signals.
Connecting a video source using 3G input card
The 3G input card (3GIC) accepts digital video data from HD and 3G-SDI (Serial Digital Interface)
sources.
Part number: 108-313101-02+
The port configurations listed below are supported.
Input configuration
Description
Requirements
Four-Port
Enables connection of four SDI cables to two 3GIC cards.
Each SDI input supplies one quadrant or column of a 4K input
image. This configuration supports high resolution and high
frame rate input video streams.
Two 3GIC cards
Four-Port, Dual-Input 3D
May be used for Dual-Input 3D configurations.
Four 3GIC cards
One-Port
Enables connection of one SDI cable to the 1-IN input of a
3GIC card (in any slot). In this configuration the SDI input
supplies the entire video raster.
One 3GIC card
One-Port, Dual-Input 3D
May be used for Dual-Input 3D configurations.
One 3GIC card
This card may or may not be included with your model. Standard inputs are subject to change.
Connecting devices and establishing communication
Mirage 304K (Bm.1) Installation and Setup Guide
37
020-102013-12 Rev. 1 (09-2022)
Copyright
©
2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Summary of Contents for Mirage 304K
Page 1: ...Installation and Setup Guide 020 102013 12 Mirage 304K Bm 1...
Page 68: ......