This card may or may not be included with your model. Standard inputs are subject to change.
Connecting a video source using HBMIC
The high bandwidth multi-input card (HBMIC) accepts digital video data from QSFP+, DisplayPort,
HDMI, and 12G, 6G, 3G, and HD SDI sources.
Part number: 144-116109-XX
Input configuration
Description
Requirements
One-Port
Enables connection of any one of the input standards,
processes it, and routes it to the backplane interface. The
module allows for concurrent processing of HDMI 2.0,
DisplayPort 1.2, and SDI inputs to enable preview capability
and fast syncing/switching between inputs. It can also be
switched to Christie Link mode allowing interfacing with the
Christie Link transmitter.
1 HBMIC card
One-Port, Dual-Input 3D
May be used for SDI inputs.
1 HBMIC card
Connecting a video source using TSIC
The Terra SDVoE (TSIC) input card accepts digital video data from a Christie Terra Transmitter.
Part number: 144-132107-XX
The port configuration listed below is supported.
Input configuration Description
Requirements
One-Port
Enables a connection from an SDVOE source (such as the
Christie Terra Transmitter) and routes it to the backplane
interface. Refer to the signal chart for more information about
what resolution, frame rates, and formats are supported based
on the projector the card is installed in.
1 TSIC card
Connecting devices and establishing communication
Mirage 304K (Bm.1) Installation and Setup Guide
40
020-102013-12 Rev. 1 (09-2022)
Copyright
©
2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Summary of Contents for Mirage 304K
Page 1: ...Installation and Setup Guide 020 102013 12 Mirage 304K Bm 1...
Page 68: ......
